Please note that the answers below are those of J.Seigel Footwear Inc., and not necessarily those of any of our footwear suppliers .
IMPORTANT: If you are experiencing serious or persistant foot pain, please consult a qualified doctor or footcare specialist for guidance.

If you have questions we will attempt to respond within a few business days by e-mail. Some of these questions and responses may be posted, but names will be withheld.

For questions on freight, taxes, warranty, etc.click here.

1.	Different Lengths of Feet
Question:	Which foot is always longer?
Answer:	There is no rule on this topic. It will vary from person to person, but it is common to have one foot longer than the other.

2.	Different Widths of Feet
Question:	Is my longer foot my wider foot ?
Answer:	Usually, NO!! There is a tendency as one arch flattens more than the other that the foot with the flatter arch extends out forward. Since the little toe of that foot now hits the curve of the shoe you may now be under the impression that you need a much wider shoe . The reality of the situation is that this foot is probably 1/2 to a full size longer (this happens at any age), but quite a bit narrower. The problem is usually rectified by purchasing straighter lasted footwear in a longer but narrower fit.

3.	Heel Slippage
Question:	How can you stop the heel from ' slipping' ?
Answer:	There are many answers, but not all will work: A. Footwear that come in widths should have a degree of combination lasting: i.e a D width shoe has a B width heel; a B width shoe has a AA width heel; etc, etc. Consider going up a 1/2 size and down a width. This will balance out the width but still give a narrower heel. B. Consider a thin orthotic-type insole that has cupping at the heel. The heel is grabbed better, and turns even a rubber boot into more of a shoe fit. Prices on these inexpensive rigid insoles usually range from $5 to $20. C. Shims or 'cheaters' are always the shoeperson's way of choice. These are 1/2 insole, usually put under the existing insole at the front of the shoe. The purpose is to stop the foot from sliding forward, thus keeping the heel tighter. Shims are normally made out of cork or foam.

4.	Shoes to accomodate orthotics
Question:	I am getting custom made arch supports. Can I now wear any shoe ?
Answer:	Nice try. If anything, your choice just diminished greatly. First you will need footwear that has the depth in the instep, and the extra height at the heel to help grab your foot that has now been elevated by the orthotic. Next, you need a shoe that will complement your orthotic insole in solving your problem, be it pronation, heel spur, arch problems, etc., etc. The person who made your arch supports should be making recommendations.We can also make suggestions, but it is very difficult to do a 'fitting' over the internet.